English
Mid-cure epoxy glue two-part; 15 minutes. 4-1/2 oz. total (both parts) - 2 hr. cure. Flexible, 3800 pounds per square inch strength. This is the adhesive of choice when you need longer working time and exceptional adhesion. A cost-effective alternative for high volume gluing.
Tip: use baseplate wax to plug the ends of your tubes and prevent glue from getting inside. Glue inside your pen tubes is one of the leading causes of pen failure.
This glue is like thick CA glue but gives you more working time before it sets up. Thick CA glue is used to glue pen tubes into pen blanks. Because it is thick, it easily fills any gaps between your pen tube and the inside of your pen blank. If you don’t fill those gaps, these can weaken your pen blanks and cause a blow out when you are turning. Cover your pen tube generously with glue and insert it into the blank using a twisting motion – this spreads the glue around on the inside of the blank, ensuring good adhesion.
Please note: epoxy will set in the bottles if the two liquids come into contact with each other in any way - whether through inadvertant switching of the caps or when you are mixing your epoxy, for example. This product also has a shelf life of approximately 6 - 12 months. We do not replace epoxy that has dried up or otherwise become unusable.
Material Safety Data Sheet (MSDS)
Price per two part set in Canadian dollars.
Français
